Up

LK202-25

LK202-25The LK202-25 is an intelligent alphanumeric liquid crystal display designed to decrease development time by providing an instant solution to any project.  In addition to the RS232, TTL and I2C protocols available in the standard model, a USB communication model allow the LK202-25 to be connected to a wide variety of host controllers.  Communication speeds of up to 115.2kbps for serial protocols and 100kbps for I2C ensure lightning fast display updates.

The simple command structure permits easy software control of many settings including backlight brightness, screen contrast, and baud rate.  On board memory provides up to forty custom characters which can be saved within the unit and recalled for start screens, bar graphs or larger numbers.

User input is available through a five by five matrix style keypad, and six general purpose outputs provide simple switchable five volt sources.  In addition, the option of a Dallas One-Wire header provides a communication interface for up to thirty-two devices. 

View Purchasing Options Here

Manual for LK202-25 PCB Revision 3.0

Manual for the LK202-25: Standard PCB Revision 3.0 or higher, USB PCB Revision 1.0 or higher.

PDF Drawing for LK202-25 Revision 3.0

PDF style Drawing for the Standard LK202-25 Revision 3.0.

PDF Drawing for LK202-25-USB Revision 1.0

PDF style Drawing for the LK202-25-USB Revision 3.0.

2D Drawing for LK202-25 Revision 3.0

DWG style Drawing for the Standard LK202-25 Revision 3.0.

2D Drawing for LK202-25-USB Revision 1.0

DWG style Drawing for the LK202-25-USB Revision 1.0.

3D Drawing for LK202-25 PCB Revision 3.0

Solidworks .step style 3D Drawing for the Standard LK202-25 PCB Revision 3.0.

3D Drawing for LK202-25-USB Revision 1.0

Solidworks .step style 3D Drawing for the Standard LK202-25-USB PCB Revision 1.0.

Manual for PCB Revision 2.00 to 2.20

Manual for PCB Revision 2.00 to 2.20

Manual for PCB Revision 1.40 to 1.50

PCB Revision 1.40 to 1.50

Manual for PCB Revision 1.12

PCB Revision 1.12