Up

VK202-25

VK202-25The VK202-25 is an intelligent alphanumeric vacuum florescent display designed to decrease development time by providing an instant solution to any project.  In addition to the RS232, TTL and I2C protocols available in the standard model, a USB communication model allows the VK202-25 to be connected to a wide variety of host controllers.  Communication speeds of up to 115.2kbps for serial protocols and 100kbps for I2C ensure lightning fast display updates.

The simple command structure permits easy software control of many settings including backlight brightness, screen contrast, and baud rate.  On board memory provides up to forty custom characters which can be saved within the unit and recalled for start screens, bar graphs or larger numbers.

User input is available through a five by five matrix style keypad, and six general purpose outputs provide simple switchable five volt sources.  In addition, the option of a Dallas One-Wire header provides a communication interface for up to thirty-two devices. 

View Purchasing Options Here

Manual for VK202-25 Rev 3.0

Manual for the VK202-25: Standard PCB Revision 3.0 or higher, USB PCB Revision 1.0 or higher.

PDF Drawing for VK202-25 Revision 3.0

PDF style Drawing for the Standard VK202-25 Revision 3.0.

PDF Drawing for VK202-25-USB Revision 1.0

PDF style Drawing for the VK202-25-USB Revision 1.0.

2D Drawing for VK202-25 Revision 3.0

DWG style Drawing for the Standard VK202-25 Revision 3.0.

2D Drawing for VK202-25-USB Revision 1.0

DWG style Drawing for the VK202-25-USB Revision 1.0.

3D Drawing for VK202-25 Revision 3.0

Solidworks .step style 3D Drawing for the Standard VK202-25 PCB Revision 3.0.

3D Drawing for VK202-25-USB Revision 1.0

Solidworks .step style 3D Drawing for the VK202-25-USB PCB Revision 1.0.

Manual for PCB Revision PCB 2.00 to 2.20

PCB Revision 2.00 to 2.20

Autocad drawing for PCB revision 2.0 to 2.2

Autocad drawing for PCB revision 2.0 to 2.2

Manual for PCB Revision 1.40 to 1.50

PCB Revision 1.40 to 1.50