Up

LK162-12

LK 162 12The LK162-12 is an intelligent alphanumeric liquid crystal display designed to decrease development time by providing an instant solution to any project.  In addition to the RS232, TTL and I2C protocols available in the standard model, the USB communication model allow the LK162-12 to be connected to a wide variety of host controllers.  Communication speeds of up to 115.2kbps for serial protocols and 100kbps for I2C ensure lightning fast display updates.

The simple command structure permits easy software control of many settings including backlight brightness, screen contrast, and baud rate.  On board memory provides up to forty custom characters which can be saved within the unit and recalled for start screens, bar graphs or larger numbers.

User input is available through a three by four matrix style keypad, and seven general purpose outputs provide simple switchable five volt sources.  In addition, the option of a Dallas One-Wire header provides a communication interface for up to thirty-two devices. 

View Purchasing Options Here

Manual for LK162-12 PCB Revision 3.0

Manual for the LK162-12: Standard model PCB Rev3.0 or higher, USB model PCB Rev1.0 or higher.

PDF Drawing for LK162-12 Revision 3.0

PDF style Drawing for the Standard LK162-12 Revision 3.0.

PDF Drawing for LK162-12-USB Revision 1.0

PDF style Drawing for the LK162-12-USB Revision 1.0.

2D Drawing for LK162-12 Revision 3.0

DWG style Drawing for the Standard LK162-12 Revision 3.0.

2D Drawing for LK162-12-USB Revision 1.0

DWG style Drawing for the LK162-12-USB Revision 1.0.

3D Drawing for LK162-12 Revision 3.0

Solidworks .step style 3D Drawing for the Standard LK162-12 PCB Revision 3.0.

3D Drawing for LK162-12-USB Revision 1.0

Solidworks .step style 3D Drawing for the LK162-12-USB PCB Revision 1.0.

Manual for PCB Revision 2.2

PCB Revision 2.20

Manual for PCB Revision PCB 2.00

PCB Revision 2.0